Low Noise Preamplifier Circuit
Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process.
Low voltage RCA Inputs: Highest sound quality connection with quality RCA materials helps prevent interference and minimize distortion in the signal path.
High Level Inputs
Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
Stereo, Bridged Mono or Stereo/Bridged Mono Simultaneously
Fully Adjustable 12dB Crossovers
Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers.
Class / Topology
High sound quality circuit that allows POWER DRIVE to develop high levels of power with minimal distortion.
Output Device Technology
Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion.
Quick Thermal Dispersion Technology assures additional mass in the aluminum heat sink keeps the amplifier running cool with nearly undetectable distortions during normal music listening.
High energy Pulse Width Modulated Power Supply delivers power with minimal impact on the electrical system.
Nickel Plated Brass Connection with terminals allow for secure connection while resisting corrosion.
Screw Down Connectors: Easy access for hand tool allowing a quick and secure connection.
LED System Protection Circuitry Diagnostics
Monitor overload and speaker short protection with lighted indicators on the amplifier end panel.
|amp bass boost||0-18dB|
|amp speaker terminal wire gauge||12 AWG|
|amp power terminal 12v/gnd||4 AWG|
|amp speaker level audio inputs||Yes|
|amp frequency response||10Hz-22kHz|
|amp variable voltage||0.2-9V|
|amp phase shift||0-180 Degrees|
|amp subsonic filter||20Hz-250Hz|
|amp tone control / parametric eq||Built-in Bass Control|
|dimensions||11.69 x 10.81 x 3.81 in|
|amp crossover||Variable Electronic 12dB Per Octave|
|amp mono bridged @ 4 ohms||1 Ch x 1000W|
|amp power @ 4 ohms||2 Ch x 250W|
|amp power @ 2 ohms||2 Ch x 500W|
|amp max power||1000W|
|amp total channels||2|
|amp class||Class A/B|