High Level Inputs
High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included.
2 channel operation mode allows either stereo or mono bridged operation.
Variable electronic crossovers allow for complete control of the sound.
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier.
Class / Topology
Class A/B high sound quality circuit that allows amplifier to develop high levels of power with minimal distortion.
Output Device Technology
Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion.
QTD (Quick Thermal Dispersion) technology assures the amplifier makes huge power while running very cool with nearly undetectable musical distortions.
Rugged MOSFET Pulse Width Modulation power supply. Allows amplifier to product efficient power without taxing the vehicle electrical system.
Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion.
Secure connection for all power, ground and speaker connections.
Full-Range RCA Outputs for Signal Pass Through
Daisy chain multiple amplifier to eliminate additional signal cables from the source unit.
LED System Protection Circuitry Diagnostics
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
|amp class||Class A/B|
|amp signal to noise||> 90dB|
|amp fusing||30A x 2|
|amp speaker terminal wire gauge||Recommended, Spade Connector|
|pre-amp audio outputs||Full Range, RCA|
|amp speaker level audio inputs||RCA|
|amp total harmonic distortion (thd)||< 0.05%|
|amp frequency response||10Hz-45kHz|
|amp variable voltage||0.2-6V|
|amp total channels||2|
|amp bass boost||0-9dB|
|amp variable low pass crossover 12db per octave||30Hz-250Hz|
|amp variable high pass crossover 12db per octave||60Hz-1.2kHz|
|amp crossover||FULL/LPF/HPF, Switchable, VeraCross|
|amp mono bridged @ 4 ohms||1 Ch x 1500W|
|amp power @ 4 ohms||2 Ch x 375W|
|amp power @ 2 ohms||2 Ch x 750W|
|amp max power||1500W|