Borgeson® 315249
Steering Steel Coupler for 1"-DD x 3/4"-DD
A U-joint can sometimes be eliminated by using a 2 Inch straight extension, called a coupler, to extend either the steering box, RP shaft or the column shaft. The coupler can be welded and/or pinned to the un-splined end of a shaft. We offer shafts that are splined only on one end in 3 lengths: 5 Inch, 16 Inch and 36 Inch. The 1 Inch- 48 and 1 Inch Double D couplers have a 1-1/4 Inch hole that will accept either an adapter to reduce inside diameter to 3/4 Inch smooth or another splined or 3/4 Inch Double D coupler. The coupler assembly would have to be pinned and/or welded together. Welding the coupler is acceptable because there are no moving parts to damage, and the couplers steel is less susceptible to heat damage from welding. Couplers are available in the same spline or double D sizes as our u-joints. Couplers and adapters are available in steel and stainless steel.
Full overview
$58.37
Shipping:
Free Shipping
In Stock