Factor 55 introduces a new line of Aluminum Hawse Fairleads for the Powersports UTV/ATV market. Our new fairlead is offered in the common 4.875 in. mounting bolt spacing for Powersport UTV/ATV winches. What is the best surface finish for Hawse aluminum fairleads? Without a doubt it is a Type III hard anodized coating. Not cosmetic Type II anodized finishes, not powder coated, and not raw or polished aluminum. Why? Because a hard coating can resist the abrasion damage from a dirty/gritty synthetic winch rope rubbing across it. Especially during extreme side pulls where rope fiber stresses are extremely high. A Mil-A-8625 Type III hard anodized finish leaves a .002 in. thick Al2O3 ceramic coating that is in the top 5 hardest materials known to mankind. Not too far away from diamond hardness actually. Another valuable material property from hard anodized coatings are the low coefficients of friction. Low friction equals lower rope heat. Only drawback? Hard anodizing is not offered in typical bright and fancy anodized colors. All Factor 55 fairleads only come in Mil-A-8625 hard gray finishes. Not fancy, but it is the proper finish to extend the life of your synthetic rope. The reason for this is depending on your vehicle, bumper, and fairlead mounting thicknesses the shank length of the bolts may need to be longer or shorter to prevent the bolts from contacting the body of your winch. In most cases the mounting bolts that are supplied by your winch manufacturer are adequate in strength and length.
This 4.875" fairlead is CNC machined from 1" thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .50" thick
The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope
These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a laser engraved logo
Fairleads Do NOT come with mounting hardware
Made In The USA
Sold As Each
overall dimension of the 4.875"
6.25" x 1.95"
for synthetic winch rope only
Factor staff has extensive experience in the Aerospace, Defense, and semiconductor industry.
Factor 55 products are designed and manufactured using state of the art technologies.
Before the company releases any products to the public, they also perform a destructive test on each design.
Factor 55 they produce all of their products from aerospace quality materials. From 6000 and 7000 series aluminums, to 6AL-4V titanium double shear pins.
Please be advised that some kind of minor sanding, cutting, shaving
and/or filling will always be required when installing Duraflex, Carbon Creations parts. In addition,
sanding a black primer finish or other preparation work is always necessary prior to painting the parts. We guarantee
that you can return your item within 30 days of the receipt if you don’t like it or for any other reasons given that it
is in the original packaging. You’re also responsible for return shipping fees. Original shipping fees are not
refundable, so do the products if they are altered in any way. It is also a good idea to have the pats installed by a
professional who has experience working with aftermarket fiberglass and urethane body parts, including cutting,
sanding, shaving, and filling, and at a professional body shop. If any questions appear, feel free to email our
customer service at firstname.lastname@example.org or call at 866.344.9484
Write a review
This product doesn't fit your vehicle
Factor 55® - 00024
Doesn't fit your
No items in this category
Sorry, we don't have products in this category for your
You can check our store for your exact fit or change your vehicle