| thickness | 1.5mm |
| mold resistance | No odor or mold development was evident after 2 weeks at 100% relative humidity/37.8 C minimum |
| cold flexibility | Can be bent around 25 mm. mandrel at -30 degrees C with no cracking or loss of adhesion |
| adhesion characteristics | Rated from -40 to 300 Degrees F. When subjected to a 90 degree peel at a rate of 12 in/min (300 mm/min) |
| dead load | The material will show no evidence of saggin or pulling away from panel when a 34 gram weight is attached to (25 x 150 mm) strip with the assembly hanging vertically for 24 hours. |
| flammability | Tested per FMVSS 302 |
| flexibility/conformability | The material will remain flexible and conformable at temperatures as low as -30 degrees C |
| hardness | 6.5 - 9.0mm ASTM D-5 |
| peel strength | Tested in 90 degree peel at a crosshead speed of 300mm per minute on a 25 mm wide test specimen. Average load in Newtons is reported. |
| temperature resistance | HushMat Ultra will Withstand a Bake of 1 Hour at 240 Degrees C with No Deformation |
| performance requirements | The Material Remains Tacky |
| r-value | 7 |
| repositionability | The material can be repositioned and reused multiple times and still meet above adhesion characteristics. |
| safety | HushMat Ultra is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product. |
| shelf life | At Least 6 Months When Stored at 40 Degrees C or Less |
| specific gravity | 1.47 (Approx. 0.47 Pounds Per Square Foot) |
| color | Backing - Silver |
